(18-01-2019 01:30)pepe1395 Ha scritto: Copio ed incollo dal forum della Raymarine:
Unfortunately, your suggestion to interface the AIS receiver / transceiver to any device other than the MFD's NMEA 0183 input port is not valid for the following reasons:
- unlike SeaTalkng / NMEA 2000 communications protocol, SeaTalk communications protocol does not support communications of AIS data.
- Raymarine autopilot course computers featuring a NMEA 0183 communications interface are exclusively designed to support 4800 BAUD data rates. AIS receivers / transceivers supporting NMEA 0183 communications are designed to support 38400 BAUD.
- C-Series Classic MFDs are exclusively designed to support reception of AIS data via the MFD's NMEA 0183 communications interface. The NMEA 2000 and SeaTalk communications interfaces of C-Series Classic MFDs cannot be used to support communications with an AIS receiver / transceiver.
BV!
Anch'io avevo letto che il bus seatalk non gestisce i dati AIS (VDM) e quindi non ho provato il collegamento.
Sono andato diretto dall'AIS Receiver alla porta nmea 183 del C80 configurata a 38400 , che però non riceve i dati...
Mantenendo lo stesso tipo di collegamento ho provato a settare la velocità a 4800 su entrambi gli strumenti e sul C80 arrivano dei dati, infatti segnala "allarme bersaglio pericoloso" ma non mostra nulla sulla cartogafia.
Farò ulteriori test e vi farò sapere.
Per adesso grazie del contributo.
BV